GX- E-5K1 PCP Air Compressor, 5800psi 110V 900W, Auto-Stop Setting, 1 Piston & 4 Stages Compression, Water and Fan Cooling, Moisture Filter,10 Hours Continuous Work

Specifications

• 1 Piston & 4 Stages Powerful Compression: Comparing with GX-E-5K2, the main difference is 5K1 has only 1 cylinder . So the filling speed and power will be lower than 5K2. Designed by GX pump brand, this pcp air compressor utilizes 1 piston and 4 stages of compression exclusive patent technology to reduce the fill time. With the powerful motor, you can fill to max 40mpa/5800psi pressure easily. Typically, for a rifle 3-4 min. Also with the 900W max power, you can charge almost all sizes of PCP /Paintball/ Scuba tanks in the market, even over 20L. Pls note: The scuba use is not certificated.Need to put 1 more burst disc if fill over 5000psi.
• Water + Fan Cooling System : The cooling system has a high water capacity combined with a built-in water pump,radiator and powerful cooling fan. There is a remaining water indicator on a side and you just need to open water tank cap to add water in time. Notice: we drained water tank for transport, before start compressor, you have to add full coolant into water tank first , or it cause damage!!
• Two Stages Auto-Stop Setting and Moisture Filter: The automatic shut off is easily set by the twin indicator arms in the extra large easy to read Shock-resistant pressure gauge. When the desired pressure is reached the compressor shuts itself off automatically. The compressor will bleed off all moisture when filling is complete. With these user friendly features one can attach his or her air cylinder or airgun push the on button and go eat dinner or watch television.
• Super Fast Filling Speed: Filling 6.8L pcp tank, just needs 90 minutes from 0-4500psi. 0.5L from 1000psi- 4500psi, just needs 3.5 minutes. 0.5L from 1000-3000psi, needs only 2.6 minutes. 1L from 1000psi-4500psi, takes 8 minutes. 1L from 1000psi to 3000Psi, needs only 5minutes. Notice: We have exclusive design patent for the compression method , Patent No: US 9,726,165 B2 .
• New Grease Injection System: Pls note the grease tank has been added before factory. Package does not include spare grease needle any more an. After use up, suggest to buy Food Grade E.P. Grease. Notice: Never turn it for the first 6 hours of use as it will cause too much grease in the machine and cause bad air quality ! After 6 hours, can turn 2/3 or 1 turn.
• Note: when add coolant first time, add full tank, turn on switch (don't press start button), water pump will run, coolant will flow into inner water pipes, then keep adding more coolant until water tank is full.